Tips From the Moving Business Pros: The Best Ways To Move a Pinball Machine



With pinball making a big renewal across the nation, Gentle Giant wants to make certain that these classic, stunning machines stay damage-free while being carried. Oh, and we want the individuals moving them to be safe, too.

In the beginning glance, pinball devices can appear intimidating to move since of their fragility, weight, and size. Fortunately, our proficient Giants have a few tricks up their sleeves to guarantee your pinball is moved with ease.
Folding Down the Headbox

Most of contemporary pinballs (made in the last Twenty Years or so) have a hinge system which enables the headbox to be folded down. Early pinball makers had their headboxes bolted on, using either two or 4 bolts. All Electro-Mechanical pinballs use this system, together with the early Strong State machines.

Later makers have hinges and use a latching system to keep the headbox upright. There might also be two bolts inside as included security, in case the latch is broken or inadvertently un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball makers, you have to eliminate the headbox rear gain access to panel to access to the bolts and plugs inside. Normally this panel has a lock on it to keep it in location, but gradually the secret may have been lost. Frequently, there is a screw keeping this panel in location.

As soon as inside, eliminate the bolts and disconnect the large ports that have electrical wiring decreasing into the machine. You may desire to identify these connectors to put them back in the best area, however they should be different sizes, making it hard to plug back incorrectly.

You can now remove the headbox totally, or fold the headbox down onto the playfield glass. Make certain you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will assist keep the back glass in location.
Early Solid State Pinballs

For early Solid State Pinballs, you will require to get rid of the back glass. There is a lock located on the headbox in one of three areas: the left-hand side at the top, right-hand side at the leading or on top of the headbox in the.

Once unlocked, eliminate the back glass by raising it up utilizing the lift channel (at the bottom of the glass), and then pull it out from the bottom.

Then, open up the back box light panel by raising the latch located on either the left-hand side or right-hand side. The panel can now swing out towards you, and provide you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs need you to raise the lamp panel in order to swing it open.

Now that you are inside, you can eliminate the bolts, and any plugs that have wires decreasing into the maker. You may wish to label these plugs to put them moving bulky items back in the best area. You might not have to remove the plugs, as the electrical wiring must be long enough to get more info permit the headbox to be folded down.

At this point, you can lock up the lamp panel and change the back glass.
Modern Strong State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable lock system situated at the back of the headbox. Utilizing the supplied key, turn the latch 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can quickly unlatch the back box at the back of the maker. This is a basic setup and requires no tools.

If you can now fold down the head box onto the cabinet, you're done. Ensure you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.

You require to get within if you can not fold the head box down. There is a lock located at the top of the back glass in the center. Use the provided secret to unlock, and get rid of the back glass by raising it up from the bottom, and then pulling it out from the bottom.

Next, you will need to remove the screen panel. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

Remove the two bolts, put the back box back together, and fold down the head box onto the cabinet. Make sure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in location.
Getting rid of the Legs.

Pinball Device legs are held in place by 8 bolts. The contemporary pinballs have captive nuts or threaded plates inside for the bolts to screw into.

These captive nuts and threaded plates can be damaged, and the use of extra nuts may have been required. If this holds true, you will require to open the front door of the pinball, slide out the playfield glass, and raise up the playfield.

With the front door (coin door) open, move the lock down bar lock throughout and get rid of the lock down bar. Move out the playfield glass, and put in a safe place. Next, raise the playfield by putting your hand where the ball drains, and lift the playfield up.

You must now have access to any nuts that may have been used. Once any nuts have been eliminated, replace the playfield glass and lock down bar, and lock the front door.

Make sure to mark or remember which legs are for the front and back, as they will be adjusted differently to fit.
Packing the Pinball.

You are now prepared to transfer your pinball machine. Before you load it, make sure you remove the pinballs so they don't bounce around during transport.

If you are moving the pinball using a van or SUV, it may be easier to remove the legs just prior to loading the machine. Grab a friend to help and have one of you supporting the pinball, while the other gets rid of the front legs. Move the maker in, then eliminate the back legs. It is much easier to load the machine front.

Make sure you strap the pinball in, as you do not want it moving if you have to stop suddenly!

For Electro-Mechanical pinball machines, you need imp source to get rid of the headbox rear gain access to panel to get access to the bolts and plugs within. (Some more recent Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

If you are moving the pinball using a van or SUV, it may be much easier to get rid of the legs simply prior to packing the device. Grab a buddy to help and have one of you supporting the pinball, while the other gets rid of the front legs.

Leave a Reply

Your email address will not be published. Required fields are marked *